CREATE YOUR BALANCED SPLIT CABLE (1Ch -< Ch1=Ch2).

3-pole male connector with die-cast zinc shell and silver-plated contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: 2 µm Ag
‣ Contacts: Brass (CuZn39Pb3)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Shell coating: Nickel
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

Right angle male connector with 3 poles. Die-cast zinc shell and silver-plated contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: 2 µm Ag
‣ Contacts: Bronze (CuSn8)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Shell coating: Nickel
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

 NC3MRX – technical drawing (en)

3-pole female connector with die-cast zinc shell and silver-plated contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: 2 µm Ag
‣ Contacts: Bronze (CuSn8)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1) / Ck 67 (spring)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Shell coating: Nickel
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

Right angle female connector with 3 poles. Die-cast zinc shell and silver-plated contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: 2 µm Ag
‣ Contacts: Bronze (CuSn8)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1) / Ck 67 (spring)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Shell coating: Nickel
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

 NC3FRX – technical design (en)

Professional 6.35mm TRS plug. Nickel contacts, nickel-plated shell

Technical characteristics

Electric
‣ Contact resistance: depends on the mating connector mΩ
‣ Dielectric strength: 1 kVdc
‣ Insulation resistance: > 2 GΩ (initial)
‣ Rated current per contact: depends on mating connector A
‣Rated voltage: > 50V

Mechanical
‣ External cable diameter: 4.0 – 7.0 mm
‣ Lifecycles: > 1000
‣ Max wire size: 1 mm²
‣ Max wire size: 18AWG
‣ Wiring: Solder contacts

Material
‣ Bushing: Polyacetal (POM) + PU
‣ Contact plating: 2 µm Ni (Su)
‣ Contacts: Brass (CuZn39Pb3)
‣ Inserts: Polyamide (PA 6.6 30% GR)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Shell plating: Nickel
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Standards compliance: IEC 60603-11/EIA RS-453
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -20°C to +65°C

Professional 6.35mm right angle TRS plug. Nickel contacts, nickel-plated shell

Technical characteristics

Electric
‣ Contact resistance: depends on the mating connector mΩ
‣ Dielectric strength: 1 kVdc
‣ Insulation resistance: > 2 GΩ (initial)
‣ Rated current per contact: depends on mating connector A
‣Rated voltage: > 50V

Mechanical
‣ External cable diameter: 4.0 – 7.0 mm
‣ Lifecycles: > 1000
‣ Max wire size: 1 mm²
‣ Max wire size: 18AWG
‣ Wiring: Solder contacts

Material
‣ Bushing: Polyacetal (POM) + PU
‣ Contact plating: 2 µm Ni (Su)
‣ Contacts: Brass (CuZn39Pb3)
‣ Inserts: Polyamide (PA 6.6 30% GR)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Shell plating: Nickel
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Standards compliance: IEC 60603-11/EIA RS-453
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -20°C to +65°C

3-pole male connector with black die-cast zinc shell and silver contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: 2 µm Ag
‣ Contacts: Brass (CuZn39Pb3)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Clamshell: KTL black
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

Right angle male connector with 3 poles. Black die-cast zinc shell and silver contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: 2 µm Ag
‣ Contacts: Bronze (CuSn8)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Clamshell: KTL black
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

 NC3MRX – technical drawing (en)

3-pole female connector with black die-cast zinc shell and silver-plated contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: 2 µm Ag
‣ Contacts: Bronze (CuSn8)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1) / Ck 67 (spring)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Clamshell: KTL black
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

Right angle female connector with 3 poles. Black die-cast zinc shell and silver contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: 2 µm Ag
‣ Contacts: Bronze (CuSn8)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1) / Ck 67 (spring)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Clamshell: KTL black
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

 NC3FRX – technical design (en)

Professional 6.35mm TRS plug. Nickel contacts, black shell

Technical characteristics

Electric
‣ Contact resistance: depends on the mating connector mΩ
‣ Dielectric strength: 1 kVdc
‣ Insulation resistance: > 2 GΩ (initial)
‣ Rated current per contact: depends on mating connector A
‣Rated voltage: > 50V

Mechanical
‣ External cable diameter: 4.0 – 7.0 mm
‣ Lifecycles: > 1000
‣ Max wire size: 1 mm²
‣ Max wire size: 18AWG
‣ Wiring: Solder contacts

Material
‣ Bushing: Polyacetal (POM) + PU
‣ Contact plating: 2 µm Ni (Su)
‣ Contacts: Brass (CuZn39Pb3)
‣ Inserts: Polyamide (PA 6.6 30% GR)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Shell Plating: Black Chrome
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Standards compliance: IEC 60603-11/EIA RS-453
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -20°C to +65°C

Professional 6.35mm right angle TRS plug. Nickel contacts, black shell

Technical characteristics

Electric
‣ Contact resistance: depends on the mating connector mΩ
‣ Dielectric strength: 1 kVdc
‣ Insulation resistance: > 2 GΩ (initial)
‣ Rated current per contact: depends on mating connector A
‣Rated voltage: > 50V

Mechanical
‣ External cable diameter: 4.0 – 7.0 mm
‣ Lifecycles: > 1000
‣ Max wire size: 1 mm²
‣ Max wire size: 18AWG
‣ Wiring: Solder contacts

Material
‣ Bushing: Polyacetal (POM) + PU
‣ Contact plating: 2 µm Ni (Su)
‣ Contacts: Brass (CuZn39Pb3)
‣ Inserts: Polyamide (PA 6.6 30% GR)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Shell Plating: Black Chrome
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Standards compliance: IEC 60603-11/EIA RS-453
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -20°C to +65°C

3-pole male connector with black die-cast zinc shell and gold-plated contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: Hard alloy of 0.2 µm Au over 2 µm Ni
‣ Contacts: Brass (CuZn39Pb3)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Clamshell: KTL black
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

Right angle male connector with 3 poles. Black die-cast zinc shell and gold-plated contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: Hard alloy of 0.2 µm Au over 2 µm Ni
‣ Contacts: Bronze (CuSn8)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Clamshell: KTL black
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

 NC3MRX – technical drawing (en)

3-pole female connector with black die-cast zinc shell and gold-plated contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: Hard alloy of 0.2 µm Au over 2 µm Ni
‣ Contacts: Bronze (CuSn8)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1) / Ck 67 (spring)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Clamshell: KTL black
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

Right angle female connector with 3 poles. Black die-cast zinc shell and gold-plated contacts. It improves the integrity of the contact thanks also to the presence of the anti-tear. One-piece internally threaded shell for maximum strength.

Technical characteristics

Electric
‣ Capacitance between contacts: ≤ 4pF
‣ Contact resistance: ≤ 3 mΩ
‣ Dielectric strength: 1.5 kVdc
‣ Insulation resistance: > 10 GΩ (initial)
‣ Rated current per contact: 16A
‣Rated voltage: < 50V

Mechanical
‣ External cable diameter: 3.5 – 8.0 mm
‣ Insertion force: ≤ 20 N
‣ Withdrawal force: ≤ 20 N
‣ Lifecycles: > 1000
‣ Max wire size: 2.5 mm²
‣ Max wire size: 14AWG
‣ Wiring: Solder contacts
‣ Closing device: Latch closure

Material
‣ Boot: Polyurethane
‣ Contact plating: Hard alloy of 0.2 µm Au over 2 µm Ni
‣ Contacts: Bronze (CuSn8)
‣ Inserts: Polyamide (PA66)
‣ Locking element: Die-cast zinc (ZnAl4Cu1) / Ck 67 (spring)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Clamshell: KTL black
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Flammability: UL94V-0
‣ Compliance with standards: CEI 61076-2-103
‣ Protection class: IP40
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -30°C to +80°C

 NC3FRX – technical design (en)

Professional 6.35mm TRS plug. Gold contacts, black shell

Technical characteristics

Electric
‣ Contact resistance: depends on the mating connector mΩ
‣ Dielectric strength: 1 kVdc
‣ Insulation resistance: > 2 GΩ (initial)
‣ Rated current per contact: depends on mating connector A
‣Rated voltage: > 50V

Mechanical
‣ External cable diameter: 4.0 – 7.0 mm
‣ Lifecycles: > 1000
‣ Max wire size: 1 mm²
‣ Max wire size: 18AWG
‣ Wiring: Solder contacts

Material
‣ Bushing: Polyacetal (POM) + PU
‣ Contact plating: 0.2 µm Au
‣ Contacts: Brass (CuZn39Pb3)
‣ Inserts: Polyamide (PA 6.6 30% GR)
‣ Locking element: Die-cast zinc (ZnAl4Cu1)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Shell plating: Nickel
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Standards compliance: IEC 60603-11/EIA RS-453
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -20°C to +65°C

Professional 6.35mm right angle TRS plug. Gold contacts, black shell

Technical characteristics

Electric
‣ Contact resistance: depends on the mating connector mΩ
‣ Dielectric strength: 1 kVdc
‣ Insulation resistance: > 2 GΩ (initial)
‣ Rated current per contact: depends on mating connector A
‣Rated voltage: > 50V

Mechanical
‣ External cable diameter: 4.0 – 7.0 mm
‣ Lifecycles: > 1000
‣ Max wire size: 1 mm²
‣ Max wire size: 18AWG
‣ Wiring: Solder contacts

Material
‣ Bushing: Polyacetal (POM) + PU
‣ Contact plating: 0.2 µm Au
‣ Contacts: Brass (CuZn39Pb3)
‣ Inserts: Polyamide (PA 6.6 30% GR)
‣ Locking element: Die-cast zinc (ZnAl4Cu1)
‣ Shell: Die-cast zinc (ZnAl4Cu1)
‣ Shell plating: Nickel
‣ Cable gland: Polyacetal (POM)

Environmental
‣ Standards compliance: IEC 60603-11/EIA RS-453
‣ Solderability: Complies with IEC 68-2-20
‣ Temperature range: -20°C to +65°C

Professional 3-pole XLR male connector with silver plate solder terminals. Entirely designed in Australia. Ergonomic sleeve and cable gland with a diameter suitable for cables from 3mm to 8mm. Housing Shell in die-cast zinc with satin nickel finish which ensures robustness and protection from wear.

Technical characteristics

Electric
‣ Service voltage: 133V (Not suitable for household applications above 50V)
‣ AC RMS voltage test: 1400V
‣ Current welding load capacity: 15A
‣ Typical contact resistance: ≤3m Ω
‣ Insulation resistance: ≥1G Ω

Mechanical
‣ Insertion and extraction force: ≥10N – ≤30N
‣ Typical cable retention force: 22Kg to 44Kg
‣ External cable diameter: 3 – 8 mm
‣ Lifecycles: > 1000

Material
‣ Connector shell: Die-cast zinc alloy
‣ Shell finish: Satin nickel
‣ Insulation: UL94V-0 PA66, 30% glass filled
‣ Boot/Rear Shell Finish: UL94V-0 Noryl N190/Black Santoprene
‣ Cable gland: Noryl N190
‣ Sleeve: Noryl N190
‣ Molded contacts: Brass/Silver

Environmental
‣ Protection class: IP40
‣ Temperature range: -25°C to +75°C

Professional 3-pole female XLR connector with SIlver Plate solder terminals. Entirely designed in Australia. Ergonomic sleeve and cable gland with a diameter suitable for cables from 3mm to 8mm. Housing Shell in die-cast zinc with satin nickel finish which ensures robustness and protection from wear.

Technical characteristics

Electric
‣ Service voltage: 133V (Not suitable for household applications above 50V)
‣ AC RMS voltage test: 1400V
‣ Current welding load capacity: 15A
‣ Typical contact resistance: ≤3m Ω
‣ Insulation resistance: ≥1G Ω

Mechanical
‣ Insertion and extraction force: ≥10N – ≤30N
‣ Typical cable retention force: 22Kg to 44Kg
‣ External cable diameter: 3 – 8 mm
‣ Lifecycles: > 1000

Material
‣ Connector shell: Die-cast zinc alloy
‣ Shell finish: Satin nickel
‣ Insulation: UL94V-0 PA66, 30% glass filled
‣ Boot/Rear Shell Finish: UL94V-0 Noryl N190/Black Santoprene
‣ Cable gland: Noryl N190
‣ Sleeve: Noryl N190
‣ Molded contacts: Phosphor bronze/tin

Environmental
‣ Protection class: IP40
‣ Temperature range: -25°C to +75°C

Professional 3-pole XLR male connector with Silver Plate solder terminals. Entirely designed in Australia. Ergonomic sleeve and cable gland with a diameter suitable for cables from 3mm to 8mm. Housing Shell in die-cast zinc with black finish which ensures robustness and protection from wear.

Technical characteristics

Electric
‣ Service voltage: 133V (Not suitable for household applications above 50V)
‣ AC RMS voltage test: 1400V
‣ Current welding load capacity: 15A
‣ Typical contact resistance: ≤3m Ω
‣ Insulation resistance: ≥1G Ω

Mechanical
‣ Insertion and extraction force: ≥10N – ≤30N
‣ Typical cable retention force: 22Kg to 44Kg
‣ External cable diameter: 3 – 8 mm
‣ Lifecycles: > 1000

Material
‣ Connector shell: Die-cast zinc alloy
‣ Shell Finish: Black Satin Nickel
‣ Insulation: UL94V-0 PA66, 30% glass filled
‣ Boot/Rear Shell Finish: UL94V-0 Noryl N190/Black Santoprene
‣ Cable gland: Noryl N190
‣ Sleeve: Noryl N190
‣ Molded contacts: Brass/silver

Environmental
‣ Protection class: IP40
‣ Temperature range: -25°C to +75°C

Professional 3-pole female XLR connector with Silver Plate solder terminals. Entirely designed in Australia. Ergonomic sleeve and cable gland with a diameter suitable for cables from 3mm to 8mm. Housing Shell in die-cast zinc with black finish which ensures robustness and protection from wear.

Technical characteristics

Electric
‣ Service voltage: 133V (Not suitable for household applications above 50V)
‣ AC RMS voltage test: 1400V
‣ Current welding load capacity: 15A
‣ Typical contact resistance: ≤3m Ω
‣ Insulation resistance: ≥1G Ω

Mechanical
‣ Insertion and extraction force: ≥10N – ≤30N
‣ Typical cable retention force: 22Kg to 44Kg
‣ External cable diameter: 3 – 8 mm
‣ Lifecycles: > 1000

Material
‣ Connector shell: Die-cast zinc alloy
‣ Shell Finish: Black Satin Nickel
‣ Insulation: UL94V-0 PA66, 30% glass filled
‣ Boot/Rear Shell Finish: UL94V-0 Noryl N190/Black Santoprene
‣ Cable gland: Noryl N190
‣ Sleeve: Noryl N190
‣ Molded contacts: Phosphor bronze/tin

Environmental
‣ Protection class: IP40
‣ Temperature range: -25°C to +75°C

Professional 6.35mm TRS plug. Nickel contacts, black shell

Technical characteristics

Electric
‣ Load capacity: 10A
‣ Typical contact resistance: Depends on the mating connector
‣ Insulation resistance: ≥2G Ω initial
‣ Dielectric withstand voltage: 1 kV dc

Mechanical
‣ Insertion and extraction force: ≥10N – ≤30N
‣ Typical cable retention force: 22Kg to 44Kg
‣ External cable diameter: 3 – 6 mm
‣ Termination: solder
‣ Lifecycles: > 1000

Material
‣ Connector Shell: Die-cast EZDA No.3 zinc alloy
‣ Shell finish: Black polyester
‣ Insulation: PBT UL94 V-0 resin or modified PPE resin – Black
‣ Boot/Rear Shell Finish: UL94 V-0 PBT resin or modified PPE resin
‣ Cable gland: UL94 V-0 PBT modified PPO resin – Black
‣ Cable bushing: Santoprene
‣ Molded contacts: Brass/Nickel

Environmental
‣ Protection class: IP40
‣ Temperature range: -25°C to +75°C

Professional 6.35mm right angle TRS plug. Nickel contacts, black shell

Technical characteristics

Electric
‣ Load capacity: 10A
‣ Typical contact resistance: Depends on the mating connector
‣ Insulation resistance: ≥2G Ω initial
‣ Dielectric withstand voltage: 1 kV dc

Mechanical
‣ Insertion and extraction force: ≥10N – ≤30N
‣ Typical cable retention force: 22Kg to 44Kg
‣ External cable diameter: 3 – 6.5 mm
‣ Termination: solder
‣ Lifecycles: > 1000

Material
‣ Connector Shell: Die-cast EZDA No.3 zinc alloy
‣ Shell finish: Black polyester
‣ Insulation: PBT UL94 V-0 resin or modified PPE resin – Black
‣ Boot/Rear Shell Finish: UL94 V-0 PBT resin or modified PPE resin
‣ Cable gland: UL94 V-0 PBT modified PPO resin – Black
‣ Cable bushing: Santoprene
‣ Molded contacts: Brass/Nickel

Environmental
‣ Protection class: IP40
‣ Temperature range: -25°C to +75°C

Professional 3-pole XLR male connector with gold-plated solder terminals. Entirely designed in Australia. Ergonomic sleeve and cable gland with a diameter suitable for cables from 3mm to 8mm. Housing Shell in die-cast zinc with black finish which ensures robustness and protection from wear.

Technical characteristics

Electric
‣ Service voltage: 133V (Not suitable for household applications above 50V)
‣ AC RMS voltage test: 1400V
‣ Current welding load capacity: 15A
‣ Typical contact resistance: ≤3m Ω
‣ Insulation resistance: ≥1G Ω

Mechanical
‣ Insertion and extraction force: ≥10N – ≤30N
‣ Typical cable retention force: 22Kg to 44Kg
‣ External cable diameter: 3 – 8 mm
‣ Lifecycles: > 1000

Material
‣ Connector shell: Die-cast zinc alloy
‣ Shell Finish: Black Satin Nickel
‣ Insulation: UL94V-0 PA66, 30% glass filled
‣ Boot/Rear Shell Finish: UL94V-0 Noryl N190/Black Santoprene
‣ Cable gland: Noryl N190
‣ Sleeve: Noryl N190
‣ Printed contacts: Gold

Environmental
‣ Protection class: IP40
‣ Temperature range: -25°C to +75°C

Professional 3-pole female XLR connector with gold-plated solder terminals. Entirely designed in Australia. Ergonomic sleeve and cable gland with a diameter suitable for cables from 3mm to 8mm. Housing Shell in die-cast zinc with black finish which ensures robustness and protection from wear.

Technical characteristics

Electric
‣ Service voltage: 133V (Not suitable for household applications above 50V)
‣ AC RMS voltage test: 1400V
‣ Current welding load capacity: 15A
‣ Typical contact resistance: ≤3m Ω
‣ Insulation resistance: ≥1G Ω

Mechanical
‣ Insertion and extraction force: ≥10N – ≤30N
‣ Typical cable retention force: 22Kg to 44Kg
‣ External cable diameter: 3 – 8 mm
‣ Lifecycles: > 1000

Material
‣ Connector shell: Die-cast zinc alloy
‣ Shell Finish: Black Satin Nickel
‣ Insulation: UL94V-0 PA66, 30% glass filled
‣ Boot/Rear Shell Finish: UL94V-0 Noryl N190/Black Santoprene
‣ Cable gland: Noryl N190
‣ Sleeve: Noryl N190
‣ Printed contacts: Gold

Environmental
‣ Protection class: IP40
‣ Temperature range: -25°C to +75°C

3-pin male XLR cable connector, snap-lock design and ergonomic finger groove for comfortable handling. Nickel-plated shell, silver-plated contacts. Suitable for cables with an external diameter of 4 to 7mm

Technical characteristics

Electric
‣ Contact resistance: ≤ 5 mΩ
‣ Insulation resistance:> 1.5GΩ
‣Rated contact voltage: ＜10A

Mechanical
‣ Cable outer Ø: 4.0-7.0 mm
‣ Lifecycles: > 1000
‣ Insertion and withdrawal force: ≤ 30 N – ≤ 20 N
‣ Max wire size: 1.5 mm²
‣ Max wire size: 16AWG

Material
‣ Plastic body: PA6+30%GF UL94-HB
‣ Contacts: Brass
‣ Contact plating: Silver plated
‣ Shell: Zinc (ZnAl4Cu1)
‣ Shell plating: Zinc
‣ Spindle: POM
‣ Cable gland: POM
‣ Bushing: PA6+30%GF
‣ Protective boot: PVC